Mount This

admin

One of the cars I take car of was in need of some new engine mounts.  The old ones were originally made incorrectly and as a result the engine was positioned wrong. As a result many of the components attached to the engine lined up poorly.  I removed the old mounts, fit the engine up where it belonged and then developed and fabricated the new ones. The fabrication of each mount was challenging becasue several items (braided lines, the starter, two chassis stiffening members, the oil pan and oil pump) interfered with the fit up.  Enjoy the pictures !  OLD mountNew mount....another view2nd pass weave on the bottom sideold vs new-Graham-Mechanical EngineerAutosport Mechanic/Fabricator
Reply:What is it for?Very nice welds!!!Miller 252 Mig WelderMiller Spoolmatic 15AMiller Econotig TIG/ARC WelderMiller Spectrum 375 Extreme Plasma Cutter
Reply:Originally Posted by RoadRnnr69What is it for?Very nice welds!!!
Reply:Whats up Grahm?...zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Originally Posted by zapster Whats up Grahm?...zap!