|
|
Just a small repair putting a new face plate on an old, old bench vise. Took some 1/8 scrap I'd been practicing with, cut it to size and then placed on on top of the other to get the 1/4" I need. Stoked! Welds probably belong on the wall of shame, but hey I only ran less than 10 practice beads ever before this and with crappy HF wire to boot. One less vise I have to buy!Daniel 5:23
Reply:Pictures man, you must share pictures. John - fabricator extraordinaire, car nut!- bleeding Miller blue! http://www.weldfabzone.com
Reply:I know I know. I have an old Sony camera that I thought was broken, but it just had a box of bad floppies. Soon as I get some I will share!Daniel 5:23
Reply:It may be cast iron you are welding, that could be part of it. |
|
发表于 2021-9-1 00:23:04