Long Screwdriver.

admin

Sometimes ya just need a looong screwdriver, but it may need to be a Phillips, or squaredrive or hex. My $0.50 fix was this.City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:Harder than it looks, too.  Nice job!
Reply:What have you dipped the handle in?It looks like wax!Support Bacteria -  It's the only culture some people have!
Reply:One of those one time use tools.  Although something like that may be needed again.  Nice job.David Real world weldin.  When I grow up I want to be a tig weldor.
Reply:Originally Posted by distractorWhat have you dipped the handle in?It looks like wax!
Reply:At that length I'd have trouble seeing the head of the screw "Any day above ground is a good day"http://www.farmersamm.com/
Reply:I like it Danny, super nifty!
Reply:Originally Posted by farmersammAt that length I'd have trouble seeing the head of the screw
Reply:Overheard at Tanglediver's work:"Hey Tanglediver, Have you seen my little stubby nut-driver collet?"Ahh....
Reply:Originally Posted by denrepOverheard at Tanglediver's work:"Hey Tanglediver, Have you seen my little stubby nut-driver collet?"Ahh....
Reply:I have about 1/2" on either end space inside the wide drawer of that box. It's at work and I didn't measure it!"Where's your stubby nut driver collet?" Where's that flange buster o' mine? City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:I was gonna start another thread, but this one out to do. I had to come up with a handle for a scissor jack. The jack was left over after a car crashed through the chainlink from the freeway onto the company lot years ago at a previous job. So, if you had a Nissan come back from the body shop without the scissor jack, I have it right here.City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:Originally Posted by tanglediverI was gonna start another thread, but this one out to do. I had to come up with a handle for a scissor jack. The jack was left over after a car crashed through the chainlink from the freeway onto the company lot years ago at a previous job.
Reply:I have cut a socket in half and added a section of pipe to it more than once just to keep from having to drive 20 miles to the store to replace the one I had just broke  Funny you know Sears will not warrenty them if you do that Last edited by fbrown333; 10-05-2008 at 07:09 AM.Reason: spelling[SIGPIC][/SIGPIC]weekend metal melter and all around pain
Reply:[QUOTE=fbrown333;216989 Funny you know Sears will not warrenty them if you do that [/QUOTE]Or wrenches that have been ground down so they were thin enough to get at a fan clutch.or the box end of a 22mm wrench that got a slot cut in it like a line wrench for an O2 sensor.I have a drawer that has all my welded/ground/machined sockets and wrenches. I just wish I could remember what they were all for.My favorites are the allen drivers made from an allen wrench and a socketYup
Reply:Originally Posted by BurnitOr wrenches that have been ground down so they were thin enough to get at a fan clutch.or the box end of a 22mm wrench that got a slot cut in it like a line wrench for an O2 sensor.I have a drawer that has all my welded/ground/machined sockets and wrenches. I just wish I could remember what they were all for.My favorites are the allen drivers made from an allen wrench and a socket
Reply:Originally Posted by BurnitOr wrenches that have been ground down so they were thin enough to get at a fan clutch.or the box end of a 22mm wrench that got a slot cut in it like a line wrench for an O2 sensor.I have a drawer that has all my welded/ground/machined sockets and wrenches. I just wish I could remember what they were all for.My favorites are the allen drivers made from an allen wrench and a socket