Fixing to purchase a couple nozzles from Arc-Zone. Do I need anything else?

admin

I've already got the WP20 torch and the regular sized tips. I've got to get down into a pretty small area and do some intricate welding without melting everything around it. So I was looking at the #22 and #23 Lava nozzles http://www.arc-zone.com/catalog/web_...85468_76269#22Does anyone know if they take the same type of bushing/collet setup as the standard setup or am I going to need to get a few extra pieces to go a long with it?
Reply:i would guess you just need the stock stuff..and alot longer tungestion..maybe around 1 1/6" diameter.....zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:i would shoot the question at them, they have always answerd my questions prety quickly summer is here, plant a tree for mother earth. if you dont have time or space, sponcer some one else to plant one for you.feel free to shoot me a PM or e-mail me at [email][email protected] i got lots of time.