a video of some dual shield

admin

i took a quick video clip of me welding, let me now if i'm doing anything wrong.
Reply:Well, a #10 shade lens for a start =)My Babies: HF Drill pressHF Pipe Bender3   4.5" Black and Decker angle grindersLincoln Electric PROMIG 175that´s it!
Reply:I couldn't see a thingDewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools
Reply:ya could only find a shade #11 shade in the shop i'll try again tonight. here a pic of the bead.Last edited by steve28; 05-16-2007 at 11:40 AM.
Reply:Hard to tell from the pic but it looks like you have some undercut on the top edge?John -  fabricator extraordinaire, car nut!-  bleeding Miller blue! http://www.weldfabzone.com
Reply:My take is you are tilting the gun a little too much in the direction you are welding. I like to keep it closer to straight up, or tilted very little away from the puddle.
Reply:Originally Posted by elvergonWell, a #10 shade lens for a start =)
Reply:also... see if you can play with the shutter speed and iris controls.  was able to get some decent vid of TIG a while back.  I didn't have much luck with a filter...
Reply:that vid was just on my digital camera