|
|
Hey everyone, New here, been reading a lot lately. I have talked to everyone I know that welds to get advice. I just purchased a Miller Synchrowave 180SD Tig Welder with a radiator. I am wondering if there are any instructional videos out there that anyone can recommend for both stick and tig welding. Any advice is welcome. Thanks. Dennis
Reply:Originally Posted by dbilikHey everyone, New here, been reading a lot lately. I have talked to everyone I know that welds to get advice. I just purchased a Miller Synchrowave 180SD Tig Welder with a radiator. I am wondering if there are any instructional videos out there that anyone can recommend for both stick and tig welding. Any advice is welcome. Thanks. Dennis
Reply:Millerwelds.com . Good beginner manual you can download or read for free. Some video available. Also, search welding on youtube, etc. There is a lot out there for you.
Reply:I have videos from this place. I think they do a good job. But no TIG video, Stick, MIG, OXY Acetylene weld and cut.http://www.weldingvideos.com/index.html |
|
发表于 2021-9-1 00:09:57