|
|
made this for the boss a few years back. no prints just alot of looking at others.
Reply:looks awesome! Pulse spray??-NateMiller Trailblazer 302gMiller Spoolmatic 30aLN-25 x 2Idealarc SP200Hypertherm Powermax 600
Reply:The welds are a work of art. I'll never be able to do that.The design is really good.I did the same thing when I made the front end loader for the Allis. I looked around, and took the best of the best ideas from other pre-made designs.My biggest problem was trying to transfer as much load as possible off of the front end, and the forward part of the frame of the tractor.Nice job!!!!!!!!!!!!!!!!!"Any day above ground is a good day"http://www.farmersamm.com/
Reply:Looks good. I think you're missing a cylinder though DewayneDixieland WeldingMM350PLincoln 100Some torchesOther misc. tools
Reply:thanks guys! the hardest part is trying to figure how big to make the bucket! the bottom was allso the hydralic tank.the boss said it work really well.if i remember i only had 2 clyinders but made the back the same distance as the front! it all worked out. |
|
发表于 2021-9-1 00:09:11