|
|
My brother gave me a Regulator, but it does not fit any tanks I own. I no it is not C25, O2, Argon, propane or Acet. It is Matheson with a 330 on the female nut. Looks like reverse threads. Any idea? The part number on the tank gauge is 63-3313, and the other is 63-3312. The reg only had a 99 and a 3 stamped on it.HH135 MigEverlast PowerUltra 205Century heavy duty 250dc/295ac stickA/O system, victor 450 series gauges w/cutting torch and j100 torch.
Reply:Look here... http://www.concoa.com/cgachart.html ...scroll down to CGA-330 and see if that is your connection. The chart gives examples of the gases that each fitting is intended for.
Reply:Hey thanks. I guess this Regulator is not going to do me any good. These are the gases listed for it. Antimony Pentafluoride, Boron Trifluoride, Carbonyl Sulfide, Deuterium Chloride, Deuterium Sulfide, Hexafluoroacetone, Hydrogen Bromide, Hydrogen Chloride, Hydrogen Iodide, Hydrogen Sulfide, Methyl Bromide, Methyl Mercaptan, Nitrogen Trifluoride, Nitrosyl Chloride, Nitrosyl Fluoride, Nitryl Fluoride, Phenylcarbylamine Chloride, Phosphorous Pentafluoride, Phosphorous Trifluoride, Silicon Tetrafluoride, Sulfur Tetrafluoride, Trifluoroacetyl Chloride, Uranium Hexafluoride.Cannot think of a thing I could use this for. I guess I will list it on EBAY.HH135 MigEverlast PowerUltra 205Century heavy duty 250dc/295ac stickA/O system, victor 450 series gauges w/cutting torch and j100 torch.
Reply:according to Matheson Direct . comthey are showing it usable as an oxygen gauge more than likely hospital use "google search" turned up their siteidealarc 250/250 ac-dc tigidealarc 250/250 ac-dc tig #2 used for sticklincoln sp100hh125dual arbor grinder polisher30 yrs of hand tools52 pitch blocks 6p-26prake gauge -pitch gaugeG&D prop repair 918-207-6938Hulbert,okla 74441 |
|
发表于 2021-9-1 00:08:23