Where can I get this knurled knob?

admin

http://www.ebay.com/itm/UNIVERSAL-CH...#ht_3353wt_952Top right of the picture in the link. Where can I get that knurled knob at in a 1/4" NPT and do they have Orings?Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:maybe grizzly?Hobart EZ-Tig newbie.
Reply:Most of those are "AN" style plugs I think.http://en.wikipedia.org/wiki/AN_threadThe one in the picture looks larger like this:http://www.lpiracing.com/Canton-Alum...2523p26157.htmLast edited by forhire; 04-18-2012 at 03:59 PM.
Reply:check MOON EYES, or have a machine shop make it for you. I completeley F'd my lathe up and i'm lost without it, next on my list to get another. I'm lucky I work with machinests that been holding me over, but may wanna look into buying your own. It will open up a whole new world for you.I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Originally Posted by weldermikecheck MOON EYES, or have a machine shop make it for you. I completeley F'd my lathe up and i'm lost without it, next on my list to get another. I'm lucky I work with machinests that been holding me over, but may wanna look into buying your own. It will open up a whole new world for you.
Reply:Originally Posted by chimmikeOh please don't say that. That's the last thing I need to spend money on.
Reply:Here is the pair. Not likely the size you want but this will give you an idea.Weld in bung:https://www.cantonracingproducts.com...on&key=20-863AKnurled plug:https://www.cantonracingproducts.com...on&key=23-460N
Reply:^^Thanks. Originally Posted by weldermikecheck MOON EYES, or have a machine shop make it for you. I completeley F'd my lathe up and i'm lost without it, next on my list to get another. I'm lucky I work with machinests that been holding me over, but may wanna look into buying your own. It will open up a whole new world for you.