1st project with new welder

admin

I finally got my first projects with the Migmaster 250 I bought done and thought I would show some pics of them. First I made a rack on the side of the welder to wrap the cables up on, kinda liked the pics I have seen of what Miller does and decided to make one similar.Next is a hitch reciever that I put on the inlaws fifth wheel, He just uses it to haul a dirt bike on. He got the reciever at a swap meet and I got some 3/16 Plate (the frame on the trailer is all 3/16 so I figured that it will be plenty strong)  and made the brackets and welded them on, there was now way to bolt the rear mount on since the bumper is made from tubing so I decided to weld it on.I'm very happy with the new welder it worked great and made some nice welds, the ones on the top of the bracket weren't that uniform but I had limited space to get the gun into on the trailer, the did burn in good though I looked at the opposite side of the rear mount and it penitrated. Its not going anywhere which is what I wanted to make sure of.Let me know what you thinkAnthony Attached ImagesTo many hobbies not enough Cash!!1951 Chevy 1 Ton 9' Pickup resto-mod V8 4x4 1987 Pontiac Fiero GT 3800 V6 ConversionESAB MIgmaster 250www.anthonysautoservice.com
Reply:congrats..
Reply:Exciting isn't it?HH187Hobart 500i plasma cutterClark 4.5" GrinderDewalt 14" chop saw30 gallom 1.6 hp compressor10 gallon pressure pot sand blasterlots of hand tools