Cylinder height

admin

I am in the process of building a cart for my new welder and I need to know what the height is before the taper on an 80cf cylinder.  Just trying to figure out the ideal height for the chain.  Sorry, I didn't have the coin to buy the tank yet  but I will when I can.  The local steel supply quoted me $22 for full cylinder exchange of C25 with 80cf cylinder....does that sound right?
Reply:so we're litterally putting the cart before the horse here huh? you'd be good anywhere between 18" and 24" on your chain placement.There are no problems. There are only solutions. It's your duty to determine the right one.Hobart Handler 210Airco 225 Amp MSM Stinger
Reply:Will this help? Attached ImagesDon’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400
Reply:Useful pic there CEP, thanks.I don't know if it helped the OP, but I saved it. How do you know the blacksmith's dog? When you hollar at him he makes a bolt for the door!
Reply:CEP PERFECT!  Thanks!
Reply:Originally Posted by ProChargerCEP PERFECT!  Thanks!
Reply:Originally Posted by Rick VCEP Perfect?  Hey I like CEP too... but "Perfect"?
Reply:Nah, His avatar isn't perfect either. She isn't hold a beer or a sandwich.There are no problems. There are only solutions. It's your duty to determine the right one.Hobart Handler 210Airco 225 Amp MSM Stinger
Reply:Originally Posted by ThorsHammerNah, His avatar isn't perfect either. She isn't hold a beer or a sandwich.
Reply:That avatar can hold my cylinder anytime.....Thermal Arc 185 ACDCLincoln Weldpac 155
Reply:Nice to see I'm not the only one who loves cowgirls! What's that song? Oh yeah, save a horse ride a cowboy! Don’t pay any attention to meI’m just a hobbyist!CarlDynasty 300V350-Pro w/pulseSG Spool gun1937 IdealArc-300PowerArc 200ST3 SA-200sVantage 400