tattoo arm rest...

admin

so my tattoo artist wanted a new arm rest stand for when she is doing tattoos on arms.. here is what i have done so far.i even did my own upholstery.... that took some timehere is my tattoo for repaymentim going to pinstripe it to night then make the adjusting nobs out of 1 1/2 aluminum solid stock for the height and to move the arm restSIN CITY METAL WORKSvisit my YouTube channel https://www.youtube.com/user/devvon
Reply:My friend, who is a tattoo artist asked me for one this past weekend. Keep us updated because I will be building one of these soon.Looks good.BillUA Local 598
Reply:looks good....Adam MMorales Ranch
Reply:Originally Posted by wd40prerunnerhere is my tattoo for repaymentim going to pinstripe it to night then make the adjusting nobs out of 1 1/2 aluminum solid stock for the height and to move the arm rest
Reply:Curious about the holes myself, good work though, on both counts.  I'm going to have to call my artist and see if he needs one, I have a sleeve he needs to finish. lol!www.thefusionsolution.com
Reply:thanks for the nice comments thought i was going to get bashed on my tattoo haha.i have the hogan roto broaches to cut the sheet metal then use my  jmr dimple dies i went with 1" on top and 2" for the lower hole. i have a HF 20 ton press.SIN CITY METAL WORKSvisit my YouTube channel https://www.youtube.com/user/devvon
Reply:I like the metal work, it's goodNow for my tat storyEx wife comes home one day, anounces we're goin' to Arkansas City (a little town just over the state line in Kansas) (back then tatoo parlors were illegal in Oklahoma)Ok, says IAfter hours in the pickup, my back feeling like a creaky spring, we arrive"I'm just gonna look"20 minutes later she's got her legs spread over the armrests on the chair, sitting backwards, with her *** sticking up in the airI figure we just advanced beyond the "looking" stageI don't particularly care to watch a nice rear end get ruined, so I go out and sit in the truck with Clarence.She comes out about 15 minutes later, informs me that if I don't care to stay, the gents in the tatoo parlor would be happy to give her a ride home (BACK TO CENTRAL OKLAHOMA)The first cracks in the mortar are small, but eventually the brick wall comes tumbling downIn retrospect, me and Clarence shoulda called it a night, and headed home by ourselves.  Woulda saved a lot of time and grief."Any day above ground is a good day"http://www.farmersamm.com/
Reply:Sam, Judy says just proves 'hind' sight is better than foresight.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:Duane, the beauty of it all was the fact that Clarence was non-judgementalCalmed my nerves, and made the rest of the trip doableDON'T ANYBODY GET THIS WRONG..........I HAVE NOTHING AGAINST TATS ON DOODS, BUT I STILL BELIEVE IN THE FAIRER SEX"Any day above ground is a good day"http://www.farmersamm.com/
Reply:Sam, What part of Oklahoma are you from?
Reply:I've built a ton of those over the past 10 years. Polished stainless, laser cut skulls for the base, nautical stars, crankshafts or camshafts for the post. They are kinda fun to do because they are easy and work great as tips. We have made a few with a panavise swivel under the "rest" part and artists seem to really like them. I bet I could make a ton of them and sell them at conventions. I dont know about the health inspectors in your area, but I made one with a hotrod flame theme - had it upholstered  with some red zodiac vinyl with yellow piping around the edges, and the health inspector said it wasnt safe because of the spaces that may not get cleaned right. I felt it was a moot point as the rest is wrapped up for every new client. Cant wait to see it finished.
Reply:just painted it and pinstriped it SIN CITY METAL WORKSvisit my YouTube channel https://www.youtube.com/user/devvon
Reply:Looks real good!www.thefusionsolution.com
Reply:thanks!SIN CITY METAL WORKSvisit my YouTube channel https://www.youtube.com/user/devvon
Reply:Oh man it's only 1030 when I took this picture. I'm working inside a pipe on a roof I can only imagine what it is inside thereSIN CITY METAL WORKSvisit my YouTube channel https://www.youtube.com/user/devvon
Reply:Here is a bad picture of one of the set nobs I made this morning before workSIN CITY METAL WORKSvisit my YouTube channel https://www.youtube.com/user/devvon
Reply:Nice work....I grew up in Vegas, and got my undergrad in Reno...I miss the west -- culture, desert, people, and friends1981 Lincoln SA 200Miller Trailblazer 302gMiller 211 Mig Welder w/ AutosetI'm learning to stick metal together
Reply:I like it!  I won't steal your design of course, but I might have to ask my current artist if he could use one of these.  I need to go see him about some touchup work anyway... trading for work would be awesome, as I don't exactly make a big salary, and I've got my next three pieces of ink already planned.  Barter rules!
Reply:Go ahead steal my design... I was happy when she told me that we could trade work!SIN CITY METAL WORKSvisit my YouTube channel https://www.youtube.com/user/devvon