Are these regulators worth getting rebuilt?

admin

Picked up a set of Harris multi-stage regulators at a estate sale for half off day... A whopping $11.00!  Any idea what it might run? Looks like the acetylene gauge is messed up or the regulator took a dump. (See pic). Would also like a lower low pressure gauge on the oxy. I have a Purox w-200 torch and a Dillon MKII. From what I researched a two stage regulator work best for the Dillons, Meco. etc.
Reply:Do you know they don't work?....try them and see before shipping them off.Regulator rebuild runs 75.00 in my neck of the woods.
Reply:Look here   http://www.regulatortorchrepair.com/
Reply:Originally Posted by walkerLook here   http://www.regulatortorchrepair.com/
Reply:Originally Posted by vwguy3Do you know they don't work?....try them and see before shipping them off.Regulator rebuild runs 75.00 in my neck of the woods.
Reply:I have dug much worse looking regulators out of the gang box and used them. I'd hook them up and see if they worked.Bill's Welder Repair (Oklahoma City) also does regulator rebuilds.Lincoln SA200's... at least 15 - 20. They come and go. Growing partial to the "Short Hoods" in my old age. Last count on Short Hoods was 13 in possession.