got a delivery today4- sheets of ex. metal4- 2x2x1/8 angle1- 2x2x3/16 angle5- 1.5x1.5 1/8 angle2- 1x1x1/8 anglethe four 2x2 where bent never had this happen beforethey ship to me from orlando im in palm bay about70 miles away ill call them tomorrow and then have to tell the customer thy have to wait till friday Attached Images
Reply:I know the point is the steel supplier screwed up! But if I had customers waiting I would get one of my 4X4 blocks and get to straightening. Take pictures(you have) and send them to the supplier for some credit. It wouldnt take much to straighten them up. Good luck ed.You have to learn the rules of the game. And then you have to play better than anyone else. Albert Einstein
Reply:Maybe someone got a bit over zealous on tying it down to the tray?Miller Auto Invision 456 + S-62 wire feederC6240B1 Gap bed lathe16 ft3 air compressor16 speed pedestal drillHafco BS-912 Bandsaw
Reply:ED will they replace at no charge ?
Reply:ill fined out tomorrow they deliver on the beach side twice a week tuesday and thursday i was able to get one job done. a pair of ramps Attached Images
Reply:Nice job...I'm dealing with snow in my driveway...Victor O/A SetHF Band SawHomebuilt 16" Abrasive Cutoff SawRed 225 Buzz BoxCraftsman 5hp. 30gal Sears and Robuck LeathDelta 6" Vert. Belt SanderDelta Drill PressGrizzly Band SawBlue EconotigLongevity 50i Plasma
Reply:Originally Posted by samsberrNice job...I'm dealing with snow in my driveway...
Reply:Originally Posted by ed macthats funny the ac turned on today it was hot
Reply:Ed-as a suggestion:Inspect the load on the truck and after off loading. If you don't like what you see thendo not accept those parts of the load that are whacked up.Blackbird
发表于 2021-8-31 23:45:21