|
|
This probably isn't the right forum to post in but here goes.I'm looking for someone, a company or maybe a member here, that can bend some 304 stainless tube for mufflers.I'm not sure of the size, i will confirm today, but I believe it will be 1" round tube with two 90° bends. The mufflers will be for golf carts and I'm looking at maybe 6-10 to start and possibly more in the future.ThanksCampbell Hausfeld Fluxcore 80Thermal Arc 185Millermatic 250JD Squared model 32 bender
Reply:Location?Ian TannerKawasaki KX450 and many other fine tools
Reply:South FloridaCampbell Hausfeld Fluxcore 80Thermal Arc 185Millermatic 250JD Squared model 32 bender
Reply:Get a hold of www.titanmotorsports.com and see who they use for their mandrel bending. They are in Florida.-AaronJet 17.5" Drill Press1942 South Bend 16x84 Lathe1980s Miller 320A / BP --- 2013 Power Mig 2562012 Jet 7x12 Horizontal BandsawVictor O/A Setup |
|
发表于 2021-8-31 23:44:56