Tig torch range

admin

Hey guy's i was recently teaching myself to walk the cup with tig, and it just wasnt happening so i decided to buy a new torch head. i was previously running a wp17 no flexi head and i purchased a wp26 and found it 100 times easier to walk the cup, i pulled of a weld on 3mm ss that i shocked myself with lol. Anyway gettin to the point i found a default in the torch and i pretty much get a new one for free or credit at the store so i was thinking consdering i have only tried a 17 and 26 is there any torchs that you could recomened that might help me even further with learning to walk the cup. Thanks steve.*Edit* And also i ran out of 316 filler so i used some er706s and the weld turned out beatiful i was wondering what are the side effects of using mild steel with ss problay underbead cracking and all that but i didnt experience none of this did i jsut get lucky?Last edited by Bozzza; 11-20-2009 at 01:53 AM.
Reply:A flex loc or a roto head tig torch will work well for cup walking.http://www.ckworldwide.com/flex-loc.htmJasonLincoln Idealarc 250 stick/tigThermal Dynamics Cutmaster 52Miller Bobcat 250Torchmate CNC tableThermal Arc Hefty 2Ironworkers Local 720