bumper build

admin

i took some time off of my fsae car build. and did a little bumper build tell me if you like it or not. cutting with my new torch and welding with my lincoln thanks guys Attached Images
Reply:seems to sit low thats a big gap between the fenders/lower grill to the bumper. it also looks small esp. on a lifted jeep you want something a little more rugged and bold looking. but it doesnt look bad. also maybe drill holes for the plate so its not zip tied to your grill??
Reply:Cut the ends off, make a 45* angle & raise the ends up to the fenders.  You're loosing a lot of ground clearance with the way it sits.Otherwise, it looks ok.MarkI haven't always been a nurse........Craftsman 12"x36" LatheEnco G-30B MillHobart Handler 175Lincoln WeldandPower 225 AC/DC G-7 CV/CCAdd a Foot Pedal to a Harbor Freight Chicago Electric 165A DC TIG PapaLion's Gate Build
Reply:Originally Posted by MarkBall2Cut the ends off, make a 45* angle & raise the ends up to the fenders.  You're loosing a lot of ground clearance with the way it sits.Otherwise, it looks ok.
Reply:Looks good to me bro!!!!
Reply:looks good throw some kcs on there to fill up the gap and your good or go with that kinda bull bar style not sure wat its called  my friend did that of his n it looked rlly good he bent a piec of 2 or 3 in pipe and it actually kinked in those crappy benders with the bottle jack he cut it angled up wit a chop saw and welded it it looked kinda like this but not as high and it was kinked lol he liked it so good for him
Reply:What's the receiver for?.  Kinda looks like you hacked a Smittybuilt bumper in half, welded the ends onto a Reese hitch and welded the whole conglomeration to the front of the Jeep.ɹǝʌo ǝɯ lloɹ 'sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
Reply:Originally Posted by TSORWhat's the receiver for?.  Kinda looks like you hacked a Smittybuilt bumper in half, welded the ends onto a Reese hitch and welded the whole conglomeration to the front of the Jeep.
Reply:Why? He has a winch plate!ɹǝʌo ǝɯ lloɹ 'sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
Reply:haha got me there idk thats all iver ever used it for
Reply:Originally Posted by moneymaker17its because of the 3" body liftthats why it looks low.thanks though