2 projects and not a cart sort of

admin

My son and I have been trying to get a gate built and a 3 legged cart for the JMR bender, well we got the 3 legger (sp)? done and the gate goes on, the frame has all bean welded up and the welds blendid and back on hold for a few days.  If all the photos dont fit it will be in 2 postings and hope I get it right it'll be the 1st time posting photos.  leave all comments good or bad.Ron Attached Images
Reply:Nice finish on the corner. I like your saw too. That vice in the background looks like it has balls! Take a lot of beating before that vice would ever brake.
Reply:we have not beat on the vice to hard yet, mostly holding DOM or sguare tube for grinding and beveling I got it and the table for 1 hundered bucks on Ebay the table is 1 inch flat plate.  The saw has been doing all of the cuts, but they have not been real square.  Thanks for the good word on the corners.
Reply:Those are some nice tripod stands. Where can I find some like that at?Tubing/Square RollerPipe BenderO/A SetupLincoln 175 HDLincoln AC 225Hypertherm Powermax 30
Reply:I got them here at our LWS they stock them all the time here, you call them and ask if they can ship out to you, where are you located? If you are in the qurqey area or Taos I could drive them out to you for a small fee.
Reply:Located SE NM. No LWS here... what brand are they? Maybe I can find them onlineTubing/Square RollerPipe BenderO/A SetupLincoln 175 HDLincoln AC 225Hypertherm Powermax 30
Reply:sumner makes a good tripod, i was wondering how do you like that ridgid grinder ?I forgot how to change this.
Reply:I like that a lot, I am thinking of getting another 1 so that we have 1 with flapper and one with the wire wheel,  I get the names in the morning of the stands and post it.ThanksRon
Reply:Yeah i want some of those pipe stands.Found them! http://www.sumner.com/sumner/sub/pro....9.29.0.0.htmlIndustrial ladder has them the cheapest looks like a set of 4 is $300http://www.industrialladder.com/prod...categoryID=360Last edited by socoj2; 01-27-2011 at 07:33 AM.
Reply:They make some cool lifts.http://www.industrialladder.com/prod...categoryID=356
Reply:the stands are cool glad you guys found a site for some.  I'm not done with the cart yet i have to drill the hole and weld the nut in place.  I have yo do the same with the mobile support I made for the truck.Thanks
Reply:Sumner stands come in shorty and a taller model. Ebay them for $99.00 or by the lot. I picked them up for 89.00 at a local welding shop. Just remember to get the folding kind!
Reply:Looks good! Nice work!MarkHammerhead RacingEdgewater Fl.  www.hammerhead1320.com