Millermatic 200 price

admin

I've located a MM200 locally in excellent shape.  Only a few pounds of wire through it.  Seller wants 1300, or 1850 with C25 and argon tanks in the 150cu ft range.  Is this a good deal?  I'm thinking $1000 for the welder only.
Reply:Seems high to me.
Reply:Location influences price. That's high to me. A NEW 212 is around $1600 to $1700.00 withFULL warranty. I'd look at new in your area if you want to spend that amount.
Reply:Wayyy too high.  I'd say $800 and tell him to keep his tanks.  You can pick up tanks on CL for 100 each depending on size.TA Arcmaster 300CM3XMT 304S22P12 suitcase feederX-Treme 12VSOptima pulserTA161SMaxstar 150STLHypertherm PM45OP setupStihl 020AVP, 039, 066 Magnum
Reply:Ditto Drf255
Reply:I paid 400.00 for one of my MM200s and was told I overpaid regardless of condition and the other MM200 I had I got for free and worked flawlessly with a small amount of work.
Reply:Thanks, guys.  I turned him down with a lower standing offer and got an email soon after that the setup was sold.