Guys we just got a new to us machine shipped to us from one of our factories. We repair beer kegs and just got into repair welding on kegs. I have never had to tig weld with a machine this nice. Right now no matter what I do with the torch hooked up with our coolmate and gas line coming in when I push the footpedal to activate the gas I can only get 10 cfm on the argon regulator. When I unhook the gas line from the machine I can set the regulator to anything I want. Anyone have some tips on this and welding very thin stainless kegs like this? I am using a 3/32 tungsten and I think 10 on the regulator is way too low.
发表于 2021-8-31 23:40:18