Looking for ideas for wall mounted fold up/down table

admin

I searched on the forum here, but only found 1 or 2.  Im looking for ideas for wall mounted fold up/down welding table. I was just looking for some different ideas. Thanks,Dave
Reply:Hey Dave,Here's a couple pics of the (2) smaller folding weld tables I made for my workbench area. I use the bench one for smaller repairs when my big rolling table is occupied. The 2nd one is my TIG table so I can "sit & relax". Both have folding arm supports. Maybe these pics will give you some ideas. The bench table is 20" X 24" & the Tig table is 24" X 36"....both are 1/4" plate.Denny Attached ImagesComplete Welding/Machine/Fab. ShopMobile UnitFinally retired*Moderator*"A man's word is his honor...without honor there is nothing.""Words are like bullets.... Once they leave your muzzle, you cannot get them back."
Reply:Thanks.  It does give me something to start from..
Reply:s-c-c:Here's some more pics for you:More pics can be found here:http://rides.webshots.com/album/561705944pOrIJnLane
Reply:I built one last weekend.  I have photos I took during the build...I'll have them posted within a few days.Miller Dynasty 200DXMillermatic 210 w/ Spoolmate 3035Hypertherm Powermax 380JD Squared Model 32Multiple fabrication tools & equipmentFull Powder Coating Setup
Reply:Where's the obligatory Jack Olson reply... he's on top of this.