Trailer Tongue

admin

Hey yall!!Well, Im in the process of turning an old S10 into a trailer. Basically, I took off the cab, the engine, transmission, front part of the frame, etc. Until I was left with this:And the next thing that I had to do, was to build a tongue. This is my first trailer project, so Im just kind of taking it as it comes. This is the tongue that I am building. I realised that I somehow managed to not take a picture of the whole thing, but I will, and I'll share that with my next update. Here are some welds on it that I ran, with 3/32" Hobart 7018, with my trusty Stickmate. I did a 6010 root pass (flat position), and covered it with two vertical weave beads. I love that little machine [Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009
Reply:And here are a couple that I did flat as well. What do you guys think?? [Account Abandoned 8/8/16 Please Do Not Attempt Contact Or Expect A Reply]. See you on YouTube! -ChuckE2009
Reply:Hi,  Do you have a pic of the frame now with the tongue?Miller Synchro250 bought new 1997Millermatic200Miller Bluestar 2E . AC/DC 16hpBluestar 2E , DC Miller Thunderbolt225 AC/DC ArcLongevity 60 plasma
Reply:did you leave the machine at 110 to run the 3/32 7018? that one tee joint the 6010is a little undercut but i believe the 7018 filled it in just fine.....