Those with Eastwood/longevity tig welders, step on in

admin

I know it can't be only me that is bothered by the cheap foot pedal. Would anyone be interested in a larger, normal size pedal? I am going to attempt to make one.Also want to know if anyone by chance happens to have a schematic so I know where each wire goes and what each wire does without having to crack it open. Its been awhile since I have done any electrical work aside from house and car wiring I've already ordered the parts to make one so hopefully it wasn't a waste of money Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:My Tigweld 160SX has a decent pedal IMO.  It's the aluminum pedal, not the stamped steel one.
Reply:Probably the same one I have. Looking for a large one like the older machines and like the thermal arc comes with.Torchmate 2x2 CNC with Flashcut CNC controlsHypertherm Powermax45 Esab ET220i Razorweld 195 MigRazorweld 200ac/dc TigTormach 770, Tormach xstechRazorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer
Reply:I am going to try imroving the existing pedal.   Simple idea to make it more like the miller on my 330.   The pedal on the 200sx has too much travel and is too short.    But. I think my mod willl work well.Tiger Sales:  AHP Distributor    www.tigersalesco.comAHP200x; AHP 160ST; MM350P,  Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma.  For Sale:  Cobra Mig 250 w/ Push-pull gun.  Lincoln Wirematic 250
Reply:The pedal on my TigWeld160SX works fine for me.Longevity 160sx Lincoln 140 miglincoln magnum spoolgunVictor torch and regulators
Reply:I would like a better foot pedal.  The eastwood pedal does have a bit of slop in it.