My Preferences

admin

I perfer to use smaw welding to other types because its a strong and durable weld and you can use it when its windy unlike gmaw or tig because of the sheilding gas needed.
Reply:Originally Posted by Welder7018I perfer to use smaw welding to other types because its a strong and durable weld and you can use it when its windy unlike gmaw or tig because of the sheilding gas needed.
Reply:i know nobody asked i was just putting it out thereWelder7018"A hero is someone who has giver his/her life for something bigger than oneself" Elmer DavisWelding holds the world together.
Reply:It all has its applications.UA Local 598
Reply:Gotta agreeWhere feasable, stick is kingEven a poor weld is generally guaranteed to at least have good fusion.It's portable like no other, and very forgiving.And I like Bud Light tooStick is the Mother of all processes, it is where it all began (aside from the blacksmith's hammer and forge).  Ceasar (sp?) would have killed for a good stick welder and some iron back in the day"Any day above ground is a good day"http://www.farmersamm.com/
Reply:Originally Posted by farmersammStick is the Mother of all processes, it is where it all began (aside from the blacksmith's hammer and forge).  Ceasar (sp?) would have killed for a good stick welder and some iron back in the day
Reply:Originally Posted by makoman1860The answer to the question nobody asked??While we are at it, I prefer Miller lite to Bud light due to better advertising, and it too is unaffected when its windy out....
Reply:I prefer Maudite ale --Wintermute"No man's knowledge here can go beyond his experience." - John Lockewww.improvised-engineering.comManufacturer Agnostic:Blood----------Sweat---------Tears----|------------------|----------------|----Lincoln Red, Miller Blue, Esab Yellow
Reply:I prefer Corona to any other beer.  When I veer off course, I usually stay with other Mexican beers, Cerveza Sol, Dos XX Equis, Corona Light or Pacifico, mostly.Fluxcore self shield wire is almost as good as good as stick as far as wind resistance.  Tig is about the worst process choice possible for wind resistance.MM350P/Python/Q300MM175/Q300DialarcHFHTP MIG200PowCon300SMHypertherm380ThermalArc185Purox oaF350CrewCab4x4LoadNGo utilitybedBobcat250XMT304/Optima/SpoolmaticSuitcase12RC/Q300Suitcase8RC/Q400Passport/Q300Smith op
Reply:Widmere HeffyUA Local 598
Reply:Heinekin or Bottled water .Stick over Fluxcore anyday..Tig above all else...  When feasable......zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:When I'm in a mood to enjoy:Dos xx EquisAny HefeweizenWhen I'm in a mood to get lit:Coors LightStick, quickly being followed by tigLast edited by jsm11; 06-25-2010 at 09:25 PM.1981 Lincoln SA 200Miller Trailblazer 302gMiller 211 Mig Welder w/ AutosetI'm learning to stick metal together
Reply:I prefer brunettes.
Reply:I prefer to use whatever suits the job best.And miller lite, bud light makes me gag.Have we all gone mad?
Reply:Bud, Bud Light, Busch light - for everyone.Peroni, Moretti, Grolsch, Guiness, Heinekin and Beck's - for alone time.Stick - for enjoyment, smaller jobs or when it's too windy.Mig - for larger jobs.Tig - ......well,........ I'm still working on that one!"Where's Stick man????????" - 7A749"SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55"I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding"Stick-man"
Reply:I prefer something a little hoppy-er if thats even a word! HAHA  Maybe a little Stone IPA or a good pale ale (Lost abbey/port brewing has a few good ones)  but after a few I generally switch over to something a little lighter like a bud light lime or straight bud light or corona.As for welding, I prefer stick.  But my opinion is somewhat jaded because its the only type of welding I have ever been able to try.
Reply:Originally Posted by Welder7018I perfer to use smaw welding to other types because its a strong and durable weld and you can use it when its windy unlike gmaw or tig because of the sheilding gas needed.