|
|
What happens when you give a couple guys a welder, plasma cutter and an old propane tank? HEAT!Its almost been one year since we built this, but just now got a video of it in action. Shop is about 7000 sqft with 30' ceiling, and we can still get 8-10*F per hour with this setup. Everything was scrap metal except the 6" pipe going up. Even the motor/squirrel cage (as you can tell by the bearing noise) was junk. Hey, it works.[ame]http://www.youtube.com/watch?v=vVj4YoWF7Cw[/ame]
Reply:I love projects built from large propane tanks. It looks like the exchanger must be working well... you still have paint on the tank. Thanks for sharing.
Reply:Nice work!City of L.A. Structural; Manual & Semi-Automatic;"Surely there is a mine for silver, and a place where gold is refined. Iron is taken from the earth, and copper is smelted from ore."Job 28:1,2Lincoln, Miller, Victor & ISV BibleDanny
Reply:I like it - cheap/basic/functional... a hot item! Rick V 1 Airco Heliwelder 3A/DDR3 CTC 70/90 amp Stick/Tig Inverters in Parallel1 Lincoln MIG PAK 151 Oxy-Acet |
|
发表于 2021-8-31 23:31:17