Aluminum ..........Still not done

admin

[ame]http://www.youtube.com/watch?v=IP8l553KStI[/ame]  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:some people will put anything on you tube.  i wonder what the purpose of that was. not instructional. he didnt even do a good job of showing off.  i guess he just wanted everyone to know that he has work, can use the same tungten all day without dressing it, and has beer at the end of the day.  they did look good though.
Reply:Originally Posted by winlight148some people will put anything on you tube.  i wonder what the purpose of that was. not instructional. he didnt even do a good job of showing off.  i guess he just wanted everyone to know that he has work, can use the same tungten all day without dressing it, and has beer at the end of the day.  they did look good though.
Reply:Hmmmmm What's wrong with beer at the end of the day?  Looks like you have a few?winlight148 winlight148 is online nowWeldingWeb Apprentice  Join Date: Sep 2010Location: depends on if my wife is mad at me or notPosts: 30Re: Look at my welds. Help.does you garage have a subpanel. if so you probly just need to do a little rearanging. no new wires needed. mine had a panel so i just got one of my buddies that does electric to come over and put a 50 amp 220 volt outlet in. also hooked up my compressor. all that in about an hour and a half. the half hr. was beer time.Reply With Quote  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Originally Posted by B_CWell if you had been following my progress you would have read that some of the tig  guys wanted to know what gas and tungsten I was using.....Sorry you didn't enjoy the video....... BUT   I  assume you have a better video your going to show us....Right?
Reply:Nice work. I haven't been following and don't know what the parts are for but nice job on the welding...BobBob WrightSalem, Ohio  Birthplace of the Silver & Deming Drillhttp://groups.yahoo.com/group/southbend10k/http://groups.yahoo.com/group/sawking/1999 Miller MM185 w/ Miller 185 Spoolmate spoolgun
Reply:Thanks B_C!  I know I've at least asked you a few questions about your setup before, so I appreciate the extra info.  Looks like a speedway torch?  Nice work as usual.
Reply:I just wish I could get thru one of those pieces without having to dress the tungsten. MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:I was a "PURE TUNGSTEN"  die hard for AC  until my friend at the LWS  turned me on to the Zirconiated  stuff.....I can't get over how long it goes between dressings....Made a believer out of me.....  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Great looking work. What the hell are they for?  Any pics of what this thing is fully assembled?
Reply:if i remember correctly i think there for go karts nice jog BC350P 30A spool gun cut master 51  syncro 250 other stuff " take a dog off the street and make him prosper and he will not bite you sad the same cannot be said for man" i didnt use punctuation just to piss you off
Reply:Originally Posted by jakeruThanks B_C!  I know I've at least asked you a few questions about your setup before, so I appreciate the extra info.  Looks like a speedway torch?  Nice work as usual.
Reply:Originally Posted by B_CI was a "PURE TUNGSTEN"  die hard for AC  until my friend at the LWS  turned me on to the Zirconiated  stuff.....I can't get over how long it goes between dressings....Made a believer out of me.....
Reply:Very nice BC. Do you use a welding positioner for these parts.T.J.www.tjsperformance.comDynasty 300 DXHTP 240HTP Microcut 380Hyperthem 85JD2 Hyd Bender and HF Hyd Ring Roller all in one =(Frankenbender)Bpt. Mill/DRO4' x 8' CNC Plasma TableInstagram: tjsperformanceYT: TJS Welding and Fabrication
Reply:You did all of those in one day? You work for one hardass, slave driving SOB!Are you using a positioner of stopping and starting?  Do you machine any of that?Very well done!Two turn tables and a microphone.
Reply:Great video and outstanding work.  Pretty typical of your other posts.  Wish I could do 1/4 that good.  Only problem I see is that your shop is WAAAAY too clean.....could ya maybe scatter some mud and sawdust around so the rest of us don't feel like slobs.I'm not sure why that guy flamed you.  What I saw/heard/learned was relatively thick aluminum, 1/8" zirconiated tung, 185 amps, 70 He / 30 Ar....isn't that what this forum is for...exchanging information?  Oh, and don't forget to enjoy a cold one when we're finished.Keep 'em coming!Miller 211 w/ spool gunMiller Dynasty 200DXLongevity 60i IGBT plasmaO/A w/ crappy chinese torch/gaugesSouth Bend 10K latheGrizzly 4029 10x54 millGrizzly 7x12 hor bandsawangle grnders, bench grnder, bench belt sndr7.5 hp 80gal cmprsor
Reply:How does one find a wife who will buy toys like that for gifts.  Dont think mine would know tig torch from tiki torch except that tig torch wouldnt help keep mosquitos away.Millermatic 252millermatic 175miller 300 Thunderboltlincoln ranger 250smith torcheslots of bfh'sIf it dont fit get a bigger hammer
Reply:Originally Posted by winlight148some people will put anything on you tube.  i wonder what the purpose of that was. not instructional. he didnt even do a good job of showing off.  i guess he just wanted everyone to know that he has work, can use the same tungten all day without dressing it, and has beer at the end of the day.  they did look good though.
Reply:Originally Posted by PangeaYou did all of those in one day? You work for one hardass, slave driving SOB!Are you using a positioner of stopping and starting?  Do you machine any of that?Very well done!
Reply:Yay I my 9100x Speedglas hood showed up today......Man 380 bucks I must be insanebut it sure is purty.....  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Originally Posted by farmshopHow does one find a wife who will buy toys like that for gifts.  Dont think mine would know tig torch from tiki torch except that tig torch wouldnt help keep mosquitos away.
Reply:Originally Posted by BTDGreat video and outstanding work.  Pretty typical of your other posts.  Wish I could do 1/4 that good.  Only problem I see is that your shop is WAAAAY too clean.....could ya maybe scatter some mud and sawdust around so the rest of us don't feel like slobs.I'm not sure why that guy flamed you.  What I saw/heard/learned was relatively thick aluminum, 1/8" zirconiated tung, 185 amps, 70 He / 30 Ar....isn't that what this forum is for...exchanging information?  Oh, and don't forget to enjoy a cold one when we're finished.Keep 'em coming!
Reply:Originally Posted by duaneb55I was referring to "dipping".
Reply:BC I have a 9100xx a real dream to use.Vinnie
Reply:looks sweet!Very well done. The years of experience sure show!And then, after so much work...... you have it in your hand, and you look over to your side...... and the runner has run off. Leaving you holding the prize, wondering when the runner will return.
Reply:Originally Posted by winlight148some people will put anything on you tube.  i wonder what the purpose of that was. not instructional. he didnt even do a good job of showing off.  i guess he just wanted everyone to know that he has work, can use the same tungten all day without dressing it, and has beer at the end of the day.  they did look good though.
Reply:B_C, nice work, I always like seeing what some one uses, I am going to look into that tungsten since I am really just now learning aluminum tig welding.
Reply:While your at it check out whole earth (Blue code)  it runs good on AC  also......  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Originally Posted by B_CWhile your at it check out whole earth (Blue code)  it runs good on AC  also......
Reply:Yeah you can,  but these parts are done with AC..........look up Aluminum with DC- and helium....  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:I didn't mean to confuse you when I said whole earth runs good on AC also I meant along with Zirconiated........SorryThis is DC- with grade 5 heliumLast edited by B_C; 04-27-2011 at 05:39 PM.  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Man that looks sharp.
Reply:Originally Posted by B_CI kinda know why he didn't think I did a good job with the video....I had been up since 5:30am  and it was after 7pm when I decided to make the video......I guess I could have spent a little more time with the weld procedure.......I'm 63 and sometimes I feel 83 if you can relate.....