some 316 stailess work

admin

a few pics of acid ducting. all plate is 1/4 and 1/2  .  work is to be installed in Arizona . Attached Images
Reply:Photos of elbow and some late nights Attached Images
Reply:more pic sorry some are of poor quality. Attached Images
Reply:Sorry some photos are not to great. I had to show i do other work than just bucket rebuilds. project took 22 days to complete. All rolling and break work was done in house. hope you all enjoy
Reply:Very impressive!   I don't think I'd even know where to start on a project of that scale!!www.lindgrensupercars.comMiller Dynasty 350Miller Dynasty 200DX - retiredMiller Millermatic 210Miller Spectrum 3080Miller "Power of Blue" stool  Miller Syncrowave 180SD - retired
Reply:How heavy is the beast? Where in NM are you? I'm assuming i'm just a hop and skip away in El Paso. Nice Work. Josh
Reply:epho Not to far from el paso at all. about an hour and a half north of Alamogordo. not to sure of the exact weight but some where around 55K all assembled. All put together it is 175 feet long.
Reply:Thanks for posting.  Not something I get to see everyday.  I like the shot of the hydraulic (?) ram inside the pipe pushing it out for fitup to the flange ring.  I wouldn't of known how much work went into it.
Reply:Great photos.
Reply:very interesting .   what size pipe is that ? there is alot  of $ sitting there .
Reply:The larger diameter is 60" and the smaller is 46". It is a bundle of coin in steel.  And yes the hydraulic ram is a must for fitting some of the pieces. The one in the photo was really out of round took a bit of pressure to get it back to how it should have been. I like the laying out for the reducing cones and saddles.....fun stuff