Puzzle dinosaur

admin

Making this for my sons school auction to raise money for playground equipment.1/4" mild steel.Parts cut out.Partial assembly.My Photos on Flickr
Reply:Nice, lots of work by hand. Did you see this posting by "forhire '' ?  Check it out , when you have the  big buck equipment what you can do .http://weldingweb.com/vbb/showthread.php...light=Dinosaur
Reply:Cool triceratops.
Reply:i like it...i was at an upscale clothing shop in Georgetown D.C. with my wife on saturday am and they had the coolest hand made counter top.....it had angle iron with all the mill scale on it welded up as a frame but they must have sprayed it with a satin clear coat and when you touched it your hands stayed clean.  it made for a very nice patina.bobs77vet/37ford4drEastwood digital TIG200HH190Lincoln Invertec 155sLincoln weldpak 100sears/craftsman (lincoln) 50a 240v buzz boxO/A rig Harris gaugesnexion cut 50 dxchicago electric (HF) 240v spot welder
Reply:Thanks for the replies.forhire: I have the layout for that Trex but dam that's quite a few more cuts than the triceratops. Of course I'm probably going to tackle it next.My Photos on Flickr
Reply:FinishedMy Photos on Flickr
Reply:Rick V 1 Airco Heliwelder 3A/DDR3 CTC 70/90 amp Stick/Tig Inverters in Parallel1 Lincoln MIG PAK 151 Oxy-Acet
Reply:Cool! Good idea for a fund raiser. I've got a full size buck head puzzle made of thin wood that I want to replicate in steel.200amp Air Liquide MIG, Hypertherm Plasma, Harris torches, Optrel helmet, Makita angle grinders, Pre-China Delta chop saw and belt sander, Miller leathers, shop made jigs etc, North- welders backpack.