Invertig 221 Sold Out...?

admin

I’m going to place an email in via HTPs email address; however - I figured I’d ask here too. HTPs website lists nearly all of their TIG welders as “sold out”, with no information on when they’ll be re-stocked. Does anyone have any additional info on when they might be receiving new stock? Thanks! Sent from my iPhone using TapatalkDo you really know all of the work that goes into getting that fish onto your plate?
Reply:With everything shut down or slowed down due the the virus in Italy orders are back ordered and will take some time getting filled. My orders are about a 2 months delay. Best thing I can say if you really want one then contact them and see if they have a waiting list and get on it.www.georgesplasmacuttershop.comPlasma Cutter and Welder Sales and Repairs--Ebay storeTec.Mo. Dealer Consumables for the PT and IPT torch's
Reply:Best to call them.  Sometimes the HNIC answers, sometimes the other crew.  Either way, you'll get an answer.
Reply:OR consider a similar Lincoln unit that actually has superior specifictions for not much more money  https://www.weldingsuppliesfromioc.c...ne-pak-k4341-1Miller Multimatic 255
Reply:This was my assumption for the delay, but I figured I’d check here as well. Thanks! Sent from my iPhone using TapatalkDo you really know all of the work that goes into getting that fish onto your plate?
Reply:I had to wait a bit for mine last year, but am glad I did. Very happy so far. And glad I didn't spend more for a lincoln or miller that isn't made in the USA like they used to be. Just my two cents, Your mileage may vary.
Reply:the answer to your question is only a phone call away 847 357 0700 and sometimes you can get internet chat going at usaweld.com.   Good folks, folks...no doubt.
Reply:Originally Posted by jeverichI’m going to place an email in via HTPs email address; however - I figured I’d ask here too. HTPs website lists nearly all of their TIG welders as “sold out”, with no information on when they’ll be re-stocked. Does anyone have any additional info on when they might be receiving new stock? Thanks! Sent from my iPhone using Tapatalk
Reply:Placed an order for a 221 Invertig /Arctic Chill Cooler.Thus far their customer support has been fantastic. Sent from my iPhone using TapatalkDo you really know all of the work that goes into getting that fish onto your plate?
Reply:Originally Posted by jeverichPlaced an order for a 221 Invertig /Arctic Chill Cooler.Thus far their customer support has been fantastic. Sent from my iPhone using Tapatalk
Reply:Originally Posted by OscarThen you're a friend of mine.   Join the HTP signal group chat.
Reply:You have probably already gotten an answer by now but for everyone else, the SV Air cooled Invertig 221's are in stock now. The water coolers are expected to be in stock in May but if you water a water cooled set up contact us becuase we have a couple options for you. The DV Invertig 221's are expected to be in stock in April along with the Pro Pulse 220 MTS. We do have waitlists for everything so make sure you get on that if you would like to be notified about a machine.Production is behind right now and manufacturers cannot get parts which is why delays are crazy. Most people don't mind waiting for their Italian Stallion though HTP America Inc.https://www.usaweld.com/default.asp847-357-0700Instagram: htpamerica_usaweldFacebook: HTP America - USAWELDYoutube: HTP America - USA WeldDrive a Lincoln, Drink a Miller, Weld with an HTP
Reply:Originally Posted by htpamerica_usaweldMost people don't mind waiting for their Italian Stallion though
Reply:Originally Posted by OscarMy stable is full.....unless y'all bring in something more powerful that what I already have..... Maybe a 3-Φ 100A plasma cutter?  That would plug nicely into a voltage up-converter that would plug into my phase converter
Reply:You got that thing on 3-Φ? 1st on WeldingWeb to have a scrolling sig! HTP Invertig 400HTP Invertig 221HTP ProPulse 300HTP ProPulse 200 x2HTP ProPulse 220MTSHTP Inverarc 200TLP HTP Microcut 875SC
Reply:Sent from my iPhone using Tapatalk:
Reply:An update.. love the machine so far. Awesome customer service.Still have a long ways to go, but it’s a start. Third or so aluminum tig bead; and a chain guard, and water tank cap that I fabricated today. I know... the ends of the bead are totally blown out.. foot slipped on the pedal! Sent from my iPhone using TapatalkDo you really know all of the work that goes into getting that fish onto your plate?
Reply:Glad to hear you like the machine and I trust it was worth the wait.  Sorry it took so long to get it to you.Jeff NolandDrive a LincolnDrink a MillerWeld with an HTP
Reply:Jeff -No apologies needed at all. From the time I ordered, to when it showed up - (IN ALAKSA!) - was 5 days. That’s fantastic. Sent from my iPhone using TapatalkDo you really know all of the work that goes into getting that fish onto your plate?
Reply:Looks good! 1st on WeldingWeb to have a scrolling sig! HTP Invertig 400HTP Invertig 221HTP ProPulse 300HTP ProPulse 200 x2HTP ProPulse 220MTSHTP Inverarc 200TLP HTP Microcut 875SC
Reply:Originally Posted by jeverichAn update.. love the machine so far. Awesome customer service.
Reply:Originally Posted by txrplsCustomer service can't be beaten. I emailed a request for a phone call on Monday on a Friday night. Jeff Noland (the owner) called me within thirty minutes. Now that is service.