Attempts with MIG/ ARC with pictures of BBQ

admin

Hey everybody, I woke up late today, and decided I should practice some welding. I took out the Arc and MIG welder.Heres the ARC attempts haha.Then I pulled out the MIGAttempts with the MIGAnd the barbecue I made at schoolI know all of these welds are ****, I'm not posting this to show my talent, but more to introduce myself, and post some of the attempts I had today. Thankyou, Oliver.
Reply:Slow down. It looks like you are going too fast in both sets of picts..No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:Bad welds or not, that's a good looking grill.  Besides what kinda load are you gonna put on that?  Probably not half a hog so your just fine.
Reply:Like the grill, Like DSW says, slow down some.  Clean your metal better before you weld, Don't get discouraged with the MIG , looks like your using flux core,  hard wire with gas backing will give you better results and you might be working on base metal that is a little to thick for your machines.   On a lighter note, get up earlier and get all the practice in you can, LOL."Si Vis Pacem Para Bellum"Lincoln Idealarc 250 AC/DCMillermatic 251   Syncrowave 300   30A spoolgunLincoln MP210Hypertherm 45(2) LN 25(2) Lincoln Weldanpower 225 CV(4) SA200   1 short hood    SA250    SAM 400