Never to old to learn

admin

All my welding has been 60# rolls of 045 wire - About ready to retire from that - So i decided to try some stick welding - Been playing for couple months with 6011 & 7018Welding a skid for bobcat to sit on, might as well stick weld it - Now what i know about stick welding you could put on the head of a pin and still have room - But you will never know till you try - So here is what i done - 7018 3/32 rod on 4x2x3/16 tube - thanks Attached ImagesThe main thing is not to panic or get excited Bobcat 250, X-Treme 12VS,  MM211Meltabo, Milwaukee,Porter Cable,Dewalt,MakitaVictor O/A, Ingersoll-RandEvolution Rage2, 40 amp PlasmaLincoln 225 AC/DC
Reply:Looks good, nice machine, is it fuel injected?MillerMatic 212, Lincoln Precision TIG 225, Hypertherm 45XP
Reply:It looks good but your travel speed may be a bit fast.
Reply:Too fast bro, and no need to whip with that rod. Get a feel for it and if need be, a nice steady, weave I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:agreed, to fast travel speed