Gas settings for Rego Torch

admin

I acquired a Bastian-Blessing Rego torch, like the one in this picture:http://www.google.com/imgres?hl=en&c...9,r:7,s:0,i:96Does anyone have a chart or some advice on where to set the gas pressure for welding with this, or can I measure the tip orifice size and go off the Smith or Victor chart?
Reply:5 and 5 is the basic setting for an oxy/fuel welding torch.
Reply:Originally Posted by mb_welder5 and 5 is the basic setting for an oxy/fuel welding torch.