Plasma Cutter recommend?

admin

I've been looking at specs on machines and have a couple questions....I haven't seen many comments here on the Lincoln pro-cut machines.    What do you guys think of the pro-cut 25 and 55?  (is the 55 an inverter machine?)What about high freq. starting vs. non?   Does it matter?  Do the little units with on-board compressors have any problems with those little compressors?I find myself leaning toward Hypertherm Powermax 600, or Lincoln Pro-cut 55.thanks for your comments.
Reply:Never used a lincoln,I do however own a Thermal Dynamics Cutmaster 51 and would recommend it to anyone.mig-HH180plasma-Cutmaster51
Reply:I have a P-tron and it does just fineCBT
Reply:Familiar with Lincoln's cutters and ThermalDynamics cutters, have used both and they are good machines.  You might want to also check out HTP plasma cutters as they have a nice variety of machines at different levels of performance and prices.  Prices I might add much more less than big red or big blue.  Their service and and help I can vouch for since I have purchased a multiprocess machine from this company.  Good luck in your decision!