harbor freight tools!!!!!

admin

A lot of harbor freight tools are said to be garbage, I think they work pretty good.... Well as long as you know how to properly use them. Attached Images
Reply:It's a poleing platform/seat for a 13 ft gheenoe(simular to a jon boat)
Reply:I'm going to buy a piece of star board for the deck for it
Reply:Nice bud! I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:nice work. Is it just me, or is that an REALLY small poling platform?There are no problems. There are only solutions. It's your duty to determine the right one.Hobart Handler 210Airco 225 Amp MSM Stinger
Reply:In the picts it almost looks like it's a floating platform. Did you use helium? .No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth! Ronald Reagan
Reply:Slick looking! Which Harbor Frieght tool?
Reply:It usually is the Indian and not the arrow, but I would like to know what tool you used.
Reply:Lol, tube roller and pipe bender.
Reply:Yes customers request, small platform. It's has an inside diameter or 19 inches
Reply:Mabey I should get into the furniture business, and make some fancy tables
Reply:Originally Posted by joseph_zlnskMabey I should get into the furniture business, and make some fancy tables
Reply:Originally Posted by joseph_zlnskI'm going to buy a piece of star board for the deck for it
Reply:Why didn't you use some of the HF welding equipment instead of just the benders? Make a good, decent project start to finish with nothing but HF tools.
Reply:Originally Posted by KelvinLooks good. You might want to rethink the starboard though - polyethylene is a type of wax and it can be slippery when wet.I'd use FRP or plywood coated with resin and gelcoat (with a non-skid pattern).
Reply:Yep I'm going to use non skid starboard. Some of harbor freight tools work pretty well, harbor freight welders are another story, they suck....in my opinion.
Reply:I installed the starboard and painted it up as well as add my decal. Attached Images
Reply:Hey, what pipe are u using? Anodized, schedule 40?