Still not sure about ALL the settings

admin

Im busy as all get out but still not sure about the Dynasty to use it for everything......  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Hey BC,I've had my 350 for almost 2 yrs. now and I have done .040 to 1" aluminum with no problems, I'm still learning to tweak the settings!! The hardest thing I found since owning the Dynasty is trying to sell the old machine!! So far it's been the best investment in welding equipment I've made. Like they say once you go Blue you'll never go back!!(2) Miller Dynasty 350 (1) Miller 250x (1) Torchmate 4x4 with PM 45
Reply:I have a very reliable mig welder at work but after I bought my dynasty 200 I will find any reason not to use it for a job. I know its a penny compared to that thing but damn I love it.
Reply:If you want BC i'll trade you my slightly used Millermatic 35 and i'll take that nasty troublesome dynasty off your hands You won't have trouble with the settings on the MM35 it's not near as complicated I would offer my TB302 AirPak in trade but i need it for field workBacked my CATMA over your CARMA oops clusmy me  What would SATAN do ?? Miller Trailblazer 302 AirPakMiller Digital Elite  Optrel Welding HatArcair K4000Suitcase 12RC / 12 VSHypertherm PM-45Rage 3 sawRusty old Truck
Reply:Paint it red.Weld like a "WELDOR", not a wel-"DERR" MillerDynasty700DX,Dynasty350DX4ea,Dynasty200DX,Li  ncolnSW200-2ea.,MillerMatic350P,MillerMatic200w/spoolgun,MKCobraMig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig2ea,MigMax1ea.
Reply:Wow with friends like you guys I don't need a WIFE  to give me Shick...Actually Im using it more and more and thinking I might get that Speedway 320 torch so I can use a 5/32 Tungsten for my heavier parts....What do you think ?Last edited by B_C; 10-25-2012 at 11:49 AM.  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Originally Posted by B_CWow with friends like you guys I don't need a WIFE  to give me Shick...Actually Im using it more and more and thinking I might get that Speedway 320 torch so I can use a 5/32 Tungsten for my heavier parts....What do you think ?
Reply:I read in the Manual  where you can set the Amplitude to SAME  and it stays the same with all the different Amp settings.......I haven't tried it yet but would like to.Have been setting the EN & EP at 100 (Suggested by my LWS )  Does it matter what value you use to set this?   Why 100?   could it be both 50 or both 150....why 100?  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock
Reply:Originally Posted by B_CI read in the Manual  where you can set the Amplitude to SAME  and it stays the same with all the different Amp settings.......I haven't tried it yet but would like to.Have been setting the EN & EP at 100 (Suggested by my LWS )  Does it matter what value you use to set this?   Why 100?   could it be both 50 or both 150....why 100?
Reply:Anyone trying any Mixed gasses on AC with their 350 Dynasty?  How does it effect the settings from straight Argon? and what did you change for the mixed gas?  Miller Dynasty 350Twenty Six HammersThree Crow BarsBig Rock