New Flow Meter???

admin

I bought a good flow meter for my MIG welder. The original unit from Lincoln was a pre set type. What CFH do you members normally run at???
Reply:I run 18 to 20 CFH with a 3/8" nozzle, 20 to 25 CFH with 1/2" nozzle and 25 to 30 CFH with a 5/8" nozzleMore is not better it just is a waste of argonwww.georgesplasmacuttershop.comPlasma Cutter and Welder Sales and Repairs--Ebay storeTec.Mo. Dealer Consumables for the PT and IPT torch's
Reply:Like most things, it depends. Draftiness of your shop, size of nozzle, joint configuration, position, etc...A few weldersA lot of hammersA whole lot of C-clamps