|
|
Guy has a used (slightly) Spectrum 625 for sale. Would $1K be a decent used price? I see them all over the web for $1600 new.Will be used for cutting frames, plate, etc.I would figure that my 6hp 60gallon upright would have no problem supplying air, no?
Reply:I run mine off a 5hp 27 gallon compressor with no problems at all. The 625 wants the air centered around 75 psi so yours should be great. I don't know what the cfm requirement is but my compressor stays ahead fine for 8ft cuts on 1/8th and such. $1k sounds like a heck of a deal if it's in good shape. |
|
发表于 2021-8-31 22:47:19