Big daddy shop crane

admin

I made some changes to the crane I built for a stair project http://weldingweb.com/vbb/showthread.php?t=252641 Now I can use it in the shop and it works great. Attached ImagesMiller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools
Reply:This is the configuration it was in for the project I built it for. Attached ImagesMiller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools
Reply:Cool!
Reply:Nice work! It looks like your shop needs a taller ceiling thoe.PROUD   AMERICAN
Reply:Originally Posted by Fletcher94Nice work! It looks like your shop needs a taller ceiling thoe.
Reply:I like the metal on the walls and ceiling. That shop crane looks like it has really come in handy. Thanks for the thread. I followed the stairs really liked it richey
Reply:Cool build! It will come really handy around your huge shop, a big hand for sure. Great job!
Reply:That looks very handy. Curious, any deflection under the centre post? Or do you have wheels under there that don't show in the pics?Cheers,Mark
Reply:Originally Posted by mammaogiThat looks very handy. Curious, any deflection under the centre post? Or do you have wheels under there that don't show in the pics?Cheers,Mark