Building a cart for my XMT 304

admin

I am tired of draging my feeder around the shop so I finally started building the cart for my setup.  Just like most of my projects for myself I am using scrap pieces. It will hold three tanks on the rear 75/25, argon, & 95/5 (for pulse mig). Attached ImagesMiller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools
Reply:Got the tanks mounted today. Attached ImagesMiller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools
Reply:Originally Posted by osweld .... It will hold three tanks ...
Reply:Yeah I will be getting some better wheels.  They are definitely at their limit.  But this is much better than the spaghetti of cables I had.Miller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools
Reply:How about a photo without all of the stuff on it?Big F**king HammerJumper cables & 2 marine batteriesJaws of life
Reply:What about buying a smith mixer and having a big argon and a small co2Nice cart, but where is the wc24?
Reply:Originally Posted by AMC724What about buying a smith mixer and having a big argon and a small co2Nice cart, but where is the wc24?
Reply:Nice work, but that is not a cart. That is a welding RV.
Reply:Originally Posted by walkerNice work, but that is not a cart. That is a welding RV.
Reply:I only have a cutmaster 42 and yes it will fit.  I just finished a splitter for power so I don't have to keep switching cables.Miller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools
Reply:Here's a pic Attached ImagesMiller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools
Reply:Nice welder SUV!! ....rather WUV!!
Reply:How did you mate the female receptacles together for the splitter, I need exactly what you have.LarryMiller XMT 304 CC/CVSyncrowave 180 SDLincoln PowerMig 255XTTermalDynamics 52Lincoln 305GComlpete machine shop to back it up
Reply:Originally Posted by LarrysmachineHow did you mate the female receptacles together for the splitter, I need exactly what you have.Larry
Reply:This is the first project I have been using my new setup on.  I am adapting this New Holland combine head to fit on a CAT Challenger. The last two days I have been working on it outside.  After making sure it is going to fit the CAT I pulled it inside out of the wind to finish.  I should have built this cart a long time ago.Miller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools
Reply:I forgot the pic Attached ImagesMiller XMT 304 cc/cvMiller 12RC w/ 15ft Tweco #4 GunMiller 30A SpoolgunCustom Thermal Arc TA 10/270 Generator "Thermal Star"Smith oxy/acet-propane with weld, cut & rosebud tipsAnd of course grinders, chop saws, hand tools