Discuz! Board

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 4|回复: 0

1988 Big 40G for sale.

[复制链接]

9万

主题

9万

帖子

29万

积分

论坛元老

Rank: 8Rank: 8

积分
293221
发表于 2021-8-31 22:43:01 | 显示全部楼层 |阅读模式
I have a 1988 Miller Big 40 Gas for sale.  I am selling it as a PARTS machine.  Last winter we had an over-night ice storm before I went to fire it up.  Something in the governer housing froze up.  The engine started and took off.  It was turning probably 3,000 rpms when I heard a back fire.  I turned it off.  Looked at the governor housing and saw oil oozing from it and in the oil was metal shavings.  So something oviously gernaded.  I was never a true fan of this engine when I bought it.  It had a rear seal leak that I could never fix.  I also felt like it was under powered- it has the Continental 3 cylinder engine.  Probably as a new engine it worked great but not after 20 years of poor maintanance.  I know the generator works well.  Previous owner said it never air-arced and I never did any air-arcing with it in the 2 and a half years I owned it.  It does come mounted on a two wheeled trailer.  Welder is located in Northern Virginia.  If interested contact me. [email protected].
Reply:does this machine have CC/CV in it?Vantage 500's LN-25's, VI-400's, cobramatics, Miller migs, synch 350 LX, Powcon inverters, XMT's, 250 Ton Acurrpress 12' brake, 1/4" 10' Atlantic shear,Koikie plasma table W/ esab plasmas. marvel & hyd-mech saws, pirrana & metal muncher punches.
Reply:Dualie, Yes. This is a constant current welder.  It does not have a polarity switch.  It has 3 KW of auxillery power.  It does have a 5 pin remote recepticle.  Other than that its plain jane Big 40 welder.  I even had to install a hour meter.  When the engine blew, I was in the middle of a pipe job.  It probably made me around $30,000.  I paid $1,600 for it in July 2006.  Like I mentioned earlier, it is mounted on a trailer.  The trailer has two new tires on it.  The trailer has a pintle hook set up.
Reply:Pictures and serial numberthanksMiller 330 A/BP Bernard SS coolerMiller cst 250Miller Big Blue 251DCentury 210 Mig (first welder I bought)Hypertherm PowerMax 800Victor torch setRu Fong 31 MilAtlas lathe
Reply:what are you asking for iit and pics
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|小黑屋|DiscuzX

GMT+8, 2025-12-30 00:34 , Processed in 0.132876 second(s), 20 queries .

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表