Coolest Youtube Welding Channels

admin

I'm curious who has the coolest Youtube channel? I've seen alot of good ones from Chucke2009,Welding Tips and Tricks, Miller, Lincoln and so forth but thiers alot of them that arent so obvious like this guy  He uses basic tools to do some cool stuff but he does lack safety but he still does great work.Lincoln pro core 125 14''chop saw7 inch grinder,2-4.5 inch grinders,electric die grinder.Half inch drillAnd alot of hand tools
Reply:my favorite is the mig lesson by sean at yougizmos.i.u.o.e. # 15queens, ny and sunny fla
Reply:Epic. I hate being bi-polar it's awsomeMy Heroes Have Always Been Cowboys
Reply:Originally Posted by weldermikeEpic.
Reply:Mike that video is painful to watch or even know it exists!! Dave J.Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~ Syncro 350Invertec v250-sThermal Arc 161 and 300MM210DialarcTried being normal once, didn't take....I think it was a Tuesday.
Reply:Originally Posted by MinnesotaDaveMike that video is painful to watch or even know it exists!!
Reply:Originally Posted by flux core joeI'm curious who has the coolest Youtube channel? I've seen alot of good ones from Chucke2009,Welding Tips and Tricks, Miller, Lincoln and so forth but thiers alot of them that arent so obvious like this guy He uses basic tools to do some cool stuff but he does lack safety but he still does great work.
Reply:Originally Posted by flux core joe He uses basic tools to do some cool stuff but he does lack safety but he still does great work.
Reply:wtf. is that a how not to weld video. lol. My 7 year old daughter does better than that.HH140---------------------------https://www.facebook.com/brandon.pike.9
Reply:The best videos I have found are by FieldRes. The guy is funny as hell, a great welder and teacher. I think he goes by Thorton on here.
Reply:DarlingtonFarm, a member here has a pretty cool channel!
Reply:Did Paul (ZTFAB) ever put any videos up yet?1973 Lincoln SA 200, Already replaced shunt coils, Idle board (SOLD)1984 Miller Dialarc 250HF, Miller water cooler, 250 AMP water cooled torch, you know the worx.
Reply:Originally Posted by Canadian WeldingDarlingtonFarm, a member here has a pretty cool channel!
Reply:+1 for fieldres!Sent from my iPhone using TapatalkAspiring Top-Notch WeldorLooking for work/experience in Eastern Massachussetts
Reply:This is where I go when I need a quick refresher on stick welding.....
Reply:I watch some of the same as above but there is a gentleman that sculpts with steel and welding and has hundreds of video's.  I think he is entertaining and informative and I think he is on here as well.  Here is one of Kevin Caron's videos on the Miller 211 autoset.  Pretty much the same machine as my Hobart 210 MVP.  Actually around the time I bought mine, Miller was out of their branded gun and were shipping with the Hobart branded one, identical other than the name on the handle... LOL.  Awesome machine BTW!
Reply:In no particular order, these are the channels I like and why....ChuckE2009. - Just cool as hell, very informative and 1st place winner in number of weld vids.   Weldingtipsandtricks -  Jody because he's a pro and an excellent teacher.  Kevin Caron - A gifted metal artist that stands above all others. (See his website pics). A great teacher.WeldFever - an up and coming new YouTuber that has a lot of potential for his welding vids. DarrlingtonFarms - just a down to earth Farmer that welds and makes neat videos. FieldRes - One flew over the cuckoo's nest, albeit a bad azz welder!!!!!!  Musher Deeds - A small one man shop welder that has made some damn good videos.  xAZAZELx13 - The BEST mass produced pipeline welding videos you'll ever see on YouTube. Alvarez Metal Works - Another one man shop welder trying to get his star on YouTube.  Great channel. TheProRancher - This guy has made a limited number of welding vids, but they're descent.  But, he makes kick azz vids about working on a real ranch!  Plus he makes custom branding irons and is a hunting/gun fanatic.  Last but not least......SV Seeker - The most incredible self taught and determined fabricator/welder I've ever witnessed on the internet!   He's documenting a gigantic welding job on his front lawn!!!!   He's making a huge all steel "battle ship" (okay, a pleasure vessel) on his front lawn with his wife.   They've been at it for a few years and it's obviously their "life's mission.   Noah would even have envied this Ship of fabricated steel and beauty.   He has hours of video documenting this enormous task with this monster metal sea vessel.  Heck, prior to this, he built and "sailed" a metal submarine!!!!   He knows how to follow blue prints and build everything from bulkheads to fabricating his own bronze propellers!  Plus, he's doing the majority of the welds with a Miller suitcase welder!Last edited by SuperArc; 05-17-2014 at 05:03 AM.Lincoln Power Mig 216Lincoln AC/DC-225/125Miller  625 X-Treme PlasmaMiller 211 Forney 95FI-A 301HF 91110Victor Journeyman O/PMilwaukee DaytonMakita  Baileigh NRA Life Member
Reply:you guys forgot MR TIG! bahahaaWelding/Fab Pics: www.UtahWeld.com
Reply:I can't stand Mr Tig.I have never seen him lay down anything decent.What a joke.Jody,Welding tips and Tricks, hands down has the best welding videos.I wish there were some awesome fabrication videos on you tube that are on the same level as welding tips and tricks.Hint Hint ZT Fab.............
Reply:I like me!!Hobart 125 EZHobart Handler 140Everlast STH 160Generic 210 Amp Welder/GeneratorHobart Air Force 500i plasma cutterChinese 50 amp plasma cutter! Youtube Channel : Henrymac100
Reply:The two I prefer are Jody and Lanse's channels.  Jody is highly skilled and knowledgeable and his videos are well produced and easy to watch.  Lanse (chucke2009) is not polished but he really has the most interesting videos because his are often project driven.  Its always nice to see someone progress through an entire build.  Not to mention I think most of us probably relate to him better than people like Mr tig.Fieldres is also a great welder but I don't enjoy his videos that much.  The worst is Mr Tig.  Whoever decided to call him a "World renowned Tig Expert" is completely delusional.  His welds normally look like crap.  Compare his beads to the beads Jody or Fieldres produce and it is obvious he is not a world renowned expert.
Reply:You guys forgot Brazil welds.Those men can weld!!! Good arc shots too.Fieldres is awesome, wish he would do some good 7018 arc shots...Jody, hands down has the most informative channel.Mr. Tig, can't weld anything but shiny metal on the table, in his pleated dockers, and shiny helmet....KC's channel has lots of beginners tips, as does Lanses.Then there's AKweldshop....Still trying to get some more welding videos....JohnJust a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Wow!!!!Thank you for including me on this list.From the desk of Kevin CaronTrying to be the best me I can!www.kevincaron.comAHP Alpha Tig 200x MillerMatic 251Miller Syncrowave 200
Reply:Originally Posted by kevinacaronWow!!!!Thank you for including me on this list.
Reply:I think your videos rock Kevin.  I also like  Lanse (chucke2009) but I think blackwaterstout hit it on the head.  I can relate to you guys, Lanse and I are both Ohio boys transplanted to the southwest so Yeah,  I just gotta watch.  Your stuff is entertaining and I feel like they way you present the information just works for me.  I guess that's why there are 8 zillion vids on YouTube.  What do they say, different strokes for different folks.  From the monotone shop teacher type that just strait gives you the information but is about as exciting as watching a Sahuaro grow.  Then on the other end you have the old Harley guy in his shop and the cigarette never leaves his mouth (not joking, He put in a second one, lite it and took a few drags off both then removed the first one all while running a mill  ).  Every other word is a cuss word but damn he knows what he is talking about.  Yeah, I'll stick to Kevin and Lanse's video's and check out some of the above ones as well.  Kevin and everyone else that does videos my hats off to you and keep up the good work.  I was starting to post up some videos for fab work aimed at total beginners, even got the new YouTube channel and email.  I had a small setback involving the HD video camera, flimsy table surface and a 5 pound stubby sledge.   I should finish this F250 bumper this weekend and I'll get a new (dustproof, waterproof, and SHOCKPROOF!) camera and get it going again... LOL.Seriously how can anyone not like Kevin Carons videos.They are entertaining.
Reply:Why does no one mention DiResta, he doesn't do a lot of welding videos. But he sure can make some creative projects. I enjoy watching DiResta.Miller Maxstar 200 SDPiperliner #10 Gold
Reply:Yo Cowboy!!You coming to my open studio tomorrow??From the desk of Kevin CaronTrying to be the best me I can!www.kevincaron.comAHP Alpha Tig 200x MillerMatic 251Miller Syncrowave 200
Reply:Originally Posted by SuperArcIn no particular order, these are the channels I like and why....FieldRes - One flew over the cuckoo's nest, albeit a bad azz welder!!!!!!
Reply:Fieldres. Hands downI am a bit biased as I am a professional pipe welderHis skill for pipe welding is epic. Any one looking to weld pipe should notice his body and hand positioning while moving around the pipe. Also the information about welding reactive alloys to code specs.Local 83
Reply:Originally Posted by kevinacaronWow!!!!Thank you for including me on this list.
Reply:Originally Posted by SuperArc......Neeeever heard of it....@2:47...
Reply:Originally Posted by AKmudLOL....AK was trying to be funny.....I think....He's pretty knowledgable for only 16 years old but he needs to work on the presentation sometimes.
Reply:Yes that guy appears to be on another level. There are probably lots of welders as good on pipe, but none that take time to put video up and explain the theory beind the practice.I don't mind the take it or leave it attitude. So many posers and trolls on the internet it's a wonder he even bothers at all.Only wish he would figure out a way to get good arc shots.I don't even weld pipe but somehow his stuff seems legitimate. The video of the truck burning is just crazy. Oh - my truck is on fire. Super dry Canadian humor. Originally Posted by RodBenderFieldres. Hands downI am a bit biased as I am a professional pipe welderHis skill for pipe welding is epic. Any one looking to weld pipe should notice his body and hand positioning while moving around the pipe. Also the information about welding reactive alloys to code specs.
Reply:Originally Posted by AKweldshopI almost didn't....
Reply:Hey Joe did you ever buy any drill bits yet?Here are some guys that I don't hear mentioned much.https://www.youtube.com/channel/UCn-...xeLeDnY-PuAeGwhttps://www.youtube.com/channel/UCF3...0nmMyR--iV5Sgwhttps://www.youtube.com/user/sunppaa/videoshttps://www.youtube.com/channel/UCRa...v8Fbrtw/videos
Reply:Just kidding.....Kevin Caron has some very informative vids....Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Btw guys,I don't claim to know everything, I've tried a lot, and worked with a lot of skilled welders.....All I did was try and share what I know.Maybe some of it wasn't helpful, but I at least think some of it was.Sorry to let you down.~JohnJust a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Originally Posted by AKweldshopBtw guys,I don't claim to know everything, I've tried a lot, and worked with a lot of skilled welders.....All I did was try and share what I know.Maybe some of it wasn't helpful, but I at least think some of it was.Sorry to let you down.~John
Reply:Wow!!Sure wasn't expecting that!!Thanks SuperArc!I'm sorry I didn't let on my age from the start...I do have a fair amount of experience welding....Been welding since I was 12.I have pics of my first ever welds.Vertical and flat with 7018.Anyone wanna see my current welds next to them??JohnJust a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Originally Posted by AKweldshopWow!!Sure wasn't expecting that!!Thanks SuperArc!I'm sorry I didn't let on my age from the start...I do have a fair amount of experience welding....Been welding since I was 12.I have pics of my first ever welds.Vertical and flat with 7018.Anyone wanna see my current welds next to them??John
Reply:Here is the pics of my firs EVER welds.Done with a ranger 8 lincoln.1/8 7018 125amps.This trailer has been around our farm for probably 30yrs, and we started to put stake pockets on it.I'll be grinding those weldsd out, and rewelding them.And I havew the back of the trailer that needs stake pockets put on....Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Originally Posted by MikeGyveryou guys forgot MR TIG! bahahaa
Reply:Originally Posted by 7A749Nuns, schoolchildren and puppies everywhere will thank you Card carrying members of the AAACE will approve as well Nice to see young guys such as yourself do ing something constructive with their time.I was too busy getting high when I was your age
Reply:[QUOTE=Advan;4161241]This is where I go when I need a quick refresher on stick welding.....If you say so.
Reply:Last edited by AKweldshop; 05-20-2014 at 06:41 PM.Just a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024
Reply:Originally Posted by MikeGyveryou guys forgot MR TIG! bahahaa
Reply:I'd like to see Mr. Tig do some pipe video's...Stainless with purge, 6g steel, and stuff like that....That will tell us if he's any good...~JohnJust a couple welders, big hammers, grinders, and torches.Work will free you.Men in dirty jeans built this country, while men in clean suits have destroyed it. Trump/Carson 2016-2024