Leland Gifford Drill press precision spindle

admin

I am selling one of my Leland Gifford drill presses. It stands about 7ft tall and weighs around 1500 lbs. Precision high speed spindle. Table is roughly 24" x 24" will built in coolant drip tray. Direct drive 2 speed motor with rpm 600-9,000. Has ground vertical dovetail ways for the spindle support and the table, which also has a knee crank to raise and lower the table. This tool cost more than $10,000 when new many years ago. It is in very good operating condition and ready for work. The only reason I am selling it is because I bought another Leland Gifford drill press with a larger table.This is a 220v 3phase machine that can easily be run off of a phase converter.$700 contact me if interested. Grant [email protected]://jackalopefab.com/MM210Synchrowave 200DXMiller XMT350 w/60series feederMiller Bobcat 250 with SGA 100 and spoolgunHTP PlasmaFull Machine shop with everything
Reply:btt and price reduction to $650http://jackalopefab.com/MM210Synchrowave 200DXMiller XMT350 w/60series feederMiller Bobcat 250 with SGA 100 and spoolgunHTP PlasmaFull Machine shop with everything
Reply:I am interested in the drill. Do you have any pictures??
Reply:Here are a few pics. Sorry if they are blurry. Taken with my phone. There is a bunch of other stuff on the table that does not come with it.I will throw in a drill press vise at no additional fee. It has drill holes in it but still works fine. I forgot to mention, the drilling table surface is in mint condition as it is not allowed to swing into the path of the drill bit.Grant Attached Imageshttp://jackalopefab.com/MM210Synchrowave 200DXMiller XMT350 w/60series feederMiller Bobcat 250 with SGA 100 and spoolgunHTP PlasmaFull Machine shop with everything
Reply:A bump up top. It will come with a drill press vise and I will throw in a procunier tapping head for no additional fee.This is a very expensive machine going for pennies on the dollar.I will drive 50 miles from 63368 for no additional fee in order to help with delivery.Granthttp://jackalopefab.com/MM210Synchrowave 200DXMiller XMT350 w/60series feederMiller Bobcat 250 with SGA 100 and spoolgunHTP PlasmaFull Machine shop with everything