|
|
"BAND SAW - Bandsaw - Large 10 Foot Blade (120 inch) Horizontal with angle cutting vice/ Vertical with table, 3/4 HP 110V, made in USA by Greenlee, SELL FOR $650.00 firm price (Cost over $3,500.00 when new), see photos below "
Reply:Originally Posted by thordehr"BAND SAW - Bandsaw - Large 10 Foot Blade (120 inch) Horizontal with angle cutting vice/ Vertical with table, 3/4 HP 110V, made in USA by Greenlee, SELL FOR $650.00 firm price (Cost over $3,500.00 when new), see photos below "
Reply:Hey Brian. Not sure what model it is. It's not in the description and I don't see it in the pictures. I would mostly be using it to do 90s but have the room to move material around the vice if I need to. I don't know how it was used but will have a chance to check it out.It looks like this one:http://cgi.ebay.com/GREENLEE-VERTICA...ht_4742wt_1052 but is a little more complete missing only the sheet metal motor cover.Looks like it might be a good deal after all...
Reply:I purchased an older one of these http://www.wellsaw.com/?page_id=138 last year for $200. It is missing nothing and even has cutting fluid setup as in the link photo, so $650 for the Greenlee seems plenty.My saw is old and the paint is not pretty but it works great. I think the vise on the Wellsaw might be a bit heavier duty than the one on the Greenlee but it is hard to tell from the photos.
Reply:i saw that same CL posting week after week |
|