|
|
I started a new project at the end of last week that involves 36" and 48" pipe. The pipe is a bit small and out of round, so there was a bit of messing around, especially when it came to lining up the holes on the flanges. Even at that, I had a great day of cutting(free hand) and another day welding with 1/16" at about 30.5v/325ipm. Attached ImagesCommon sense in an uncommon degree is what the world calls wisdom.
Reply:Looks good. Nothing a few clamps can't fix.
Reply:Try a triple crown weave! GravelThe difference between theory and practice is that in theory there is no difference. |
|
发表于 2021-8-31 22:37:05