I'm looking for a spot welder that can do a pretty good job on 3/16 combined material thickness, mainly I have a job coming that has a lot of piano hinge to be attached (200 1ft hinges).I'm not sure if a miller spot welder has enough power to get a good weld in. looking to stay within a $2500 max budget.thx in advance for ay input.
Reply:http://www.millerwelds.com/products/...__air-cooled_/LMSW-52T is rated for 3/16" and is in your budget range.
发表于 2021-8-31 22:35:55