I do some tube notching in thin wall tube and I find that even doing it in my Bridgeport mill I have some problems that I think would be helped if I could find some hole saws with finer tooth spacing. Doe anyone know of a source of hole saws with finer teeth than those you buy at most hardware or tool supply places?
Reply:http://www.medfordtools.com/metalworking/holesaws.htmlhttp://www.jmrmfg.com/featured-tools...aws-hole-saws/Last edited by forhire; 12-20-2010 at 11:42 AM.
发表于 2021-8-31 22:35:03