Anyone know if there is a pulsar made for an old Miller 250 tig seems like it could be put in the remote circuit. Not coordinated enough to feed rod move the torch and pump the peddle.ThanksBrandonLincoln Tombstone 225 A/C Steel StickerOld Victor O2/Acetylene setupMiller Syncrowave 250 Tig/PC-300 PulserMiller Millermatic 212 Mig HTP Invertatig 201 Giant Teck D50 Plasma cutterLots of HF grinders
Reply:Affiliated Machinery in Houston, TX. John Bray at [email protected]. New MPC-300 for $400.00. Designed after the Miller PC-300.MM200 w/Spoolmatic 1Syncrowave 180SDBobcat 225G Plus - LP/NGMUTT Suitcase WirefeederWC-1S/Spoolmatic 1HF-251D-1PakMaster 100XL '68 Red Face Code #6633 projectStar Jet 21-110Save Second Base!
Reply:thanks guys I have a bunch of stainless that have coming up and really need to keep the heat down Never have been very good at pulsing the peddle and feeding filler it is ether one or the other but then i have a hard time chewing gum and walking also....BrandonLincoln Tombstone 225 A/C Steel StickerOld Victor O2/Acetylene setupMiller Syncrowave 250 Tig/PC-300 PulserMiller Millermatic 212 Mig HTP Invertatig 201 Giant Teck D50 Plasma cutterLots of HF grinders
Reply:Watched a guy the other day using a finger remote switch to pulse thin stainless. It looked great once he was finished.
发表于 2021-8-31 22:29:37