Pipe Collar

admin

I'm needing a little help from yall,   I'm needing to cut some 2" pipe to make a frame for a hog pen. Several years ago I used a collar that fit around the pipe that you could trace the edge with soap stone and then cut it and it would fit up nice.   however i have no idea what it was called and cain't seem to find any through google.  If i remember right it was hinged and just fit around the pipe.   Thanks for any help!!
Reply:How bout a Pipe Wrap-Around...Wrap Gauge or as Lee spells it, RaparoundLincoln Power MIG 210 MP ( boat anchor )Lincoln Weld-Pac 100 HDHobart IronMan 230Cutmaster 42Jackson NexGenSumner Ultra ClampsDWM120
Reply:I just searched that on google and I don't think that is what i'm looking for,  what i used was metal.  Thanks though
Reply:It's called a metal template. Saddles, 45s,90s, etc.Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.                                         -Cree Indian ProverbSA 200 LincolnVictor Torches
Reply:I have seen them at my local tractor supply and atwoods.
Reply:i looked for these for years and no one had a clue what i was talking about UNTIL.... http://www.1stsourceproducts.com/store/?cat=458
Reply:TruWeld makes some yellow ones called TruCut. The model for the 2" (2.375 od) saddle is SP238-S. Cost about $10.http://www.alexgs.com/product/truweld-sp238-s.html
Reply:this what your looking for ?   http://www.woodwardfab.com/woodward_...b_page%203.htmhttp://www.aedmotorsport.com/index.a...=28075&count=1Last edited by shanem; 07-06-2011 at 11:29 AM.
Reply:Thanks everybody, Thats exactly what i was looking for, I couldn't find any at tsc but called welsco and they will have a couple different sizes for me tomorrow.  now hopefully i can build a hog trap this weekend.