WTB Harris torch handle

admin

If you have a spare Harris torch handle, B size hose fittings, fairly large one (not a jeweler's nor aircraft torch) please email me at gwe AT tinyisland DOT com and let me know your price shipped to zip 98033. Thanks!metalmagpie
Reply:Post model number and pic of your torch cutting attachment that the handle is to fit.Current list below from their website. Select torch head then check "compatible handle". Some may fit Victor and compatible handles as well. Attachements have been around so long that making equipment that "fits into" owner fleets makes sense. For example, Uniweld has built quite a business on "compatible" gear that is well made.http://www.harrisproductsgroup.com/e...t/Torches.aspxThis may help, and save it for future parts reference:www.sealseat.com/pdf/HARRIS.pdfLast edited by farmall; 01-07-2011 at 05:32 PM.
Reply:Fits handles 63-2, 18-5, 43-2. So any of those would work for me. - MM
Reply:One way I get (dirt cheap) torches and regulators is to lurk on Ebay. Unless descriptions are very precise bidders seem to have little idea what equipment "other than Victor" is. Much love for Oxweld and Purox, many of which haven't changed in a LONG time and take common tips. Used Harris stuff comes up, so know what the parts you want look like in the pleasing event that the seller isn't sure what they are. Use Ebay to study photographs. If you go to "view page info" in Firefox you can go to "media" then scroll down and download the photos from Ebay ads for reference. If you don't find a handle, you may well find a complete torch or torches.Just nailed this Smith for less than postage: http://cgi.ebay.com/ws/eBayISAPI.dll...3HJnGB6cw%253D
Reply:OK. I have decided to change my tactic. Rather than start with a single Harris welding tip (mixer E-43 and a no. 5 tip probably 23a90-5) and collect remaining bits and pieces, since I have five or six complete torch sets I think I'll just offer the Harris welding tip for sale. $10 plus shipping from zip 98033. Attached ImagesLast edited by metalmagpie; 01-08-2011 at 08:20 PM.