New found ability, any one hiring?

admin

So yea, first time and it came out all right. Syncrowave 250 Dial at 50 amps pedal modulated. 20 cfh #20 water cooled with #7 gas lens3/32 red tungsten.035 308L stainless rodNo pulse just dip
Reply:Weld them the other way, back to back instead sharp side to sharp side, then you have homemade safety razor blades! Oh, nice work, I am impressed!
Reply:Shameful waste of razor blades. Can't you use .001 shim stock instead?
Reply:Originally Posted by Sheyda36Weld them the other way, back to back instead sharp side to sharp side, then you have homemade safety razor blades! Oh, nice work, I am impressed!
Reply:The real question is.....Can you mig?
Reply:Originally Posted by mikecwikThe real question is.....Can you mig?
Reply:Image and figures look strange.
Reply:Are you down with tri mix?
Reply:I got my eye on you...Panama Red.
Reply:Weld them the other way, make two of them and weld them stacked up.  Great 8 point ninja stars, good for goofing off. Wear gloves though.Thermal arc 211iCk flex-loc 150 & 130Clamps, saws & grindersHarbor freight 80 amp inverter
Reply:Originally Posted by mikecwikImage and figures look strange.
Reply:Originally Posted by 7A749Now, if you would have stick welded it....THAT would have been impressive I prolly would have made a molten mess outta that man. You got more patience than me More skill too
Reply:Originally Posted by 7A749When I was a kid, it was like the grand prize to sharpen those cheap junk throwing stars you buy at the junk Chinese tool store..I actually made a REAL Freddy Kruger glove with knives on it. Spent untold hours after dark, hiding in my room bending the metal for the fingers and attaching real knives (with JB weld of course )They were totally bad a$$.Shortly after they were done, I hid them in my dresser. Came home on afternoon from school and they were gone. I was pissed as hell. I asked my mom what she did with them years later, she said she threw them away  Too bad she didn't keep them, but at that age I was obsessed with chainsaws, guns and anything sharp Sorry for the hijack. Go weld some more ninja stars together now!!
Reply:Originally Posted by dcoffmanjrCool, I kinda like being watched... lol. but I don't smoke pot, so not sure what your getting at there lol
Reply:Originally Posted by mikecwikI am just messing with you. I had meet the Fockers or Parents in my head.Welds look nice.
Reply:Originally Posted by 7A749When I was a kid, it was like the grand prize to sharpen those cheap junk throwing stars you buy at the junk Chinese tool store..I actually made a REAL Freddy Kruger glove with knives on it. Spent untold hours after dark, hiding in my room bending the metal for the fingers and attaching real knives (with JB weld of course )They were totally bad a$$.Shortly after they were done, I hid them in my dresser. Came home on afternoon from school and they were gone. I was pissed as hell. I asked my mom what she did with them years later, she said she threw them away  Too bad she didn't keep them, but at that age I was obsessed with chainsaws, guns and anything sharp Sorry for the hijack. Go weld some more ninja stars together now!!
Reply:Originally Posted by 7A749Now, it you want to feel invincibility, try 3/8" carbons running on a large compressor with 600 amps behind it...... If you didnt get a woody from it, there's something wrong with you
Reply:Went out in my slippers to try this.. Not bad for a first try, couldnt see crap at such a low amperage haha!HTP Invertig 201Lincoln Idealarc SP250Miller 180 AC StickBy farmall:They should have held the seagull closer to the work, squeezing evenly for best deposition.
Reply:We are going to need someone to do some major grinding in a while....This could take months.......zap!I am not completely insane..Some parts are missing Professional Driver on a closed course....Do not attempt.Just because I'm a  dumbass don't mean that you can be too.So DON'T try any of this **** l do at home.
Reply:Originally Posted by 7A749Hahaha ... and my mom would rent a pile of horror movies for me. I would spend all weekend watching them....Yeah, there's definitely something wrong with me.
Reply:Get some hardfacing filler and build up the edge on a dull blade. "USMCPOP" First-born son: KIA  Iraq 1/26/05Syncrowave 250 w/ Coolmate 3Dialarc 250, Idealarc 250SP-175 +Firepower TIG 160S (gave the TA 161 STL to the son)Lincwelder AC180C (1952)Victor & Smith O/A torchesMiller spot welder
Reply:I heard Schick needs some guys to tack those 5 blades razors together.